How to Store and Clean Colourvue Lenses Without Damage

By Premium Coloured Contact | Published: 2026-10-13

Category: Tips & Care

A step-by-step Colourvue care routine covering cleaning, rinsing, case hygiene, and storage so your coloured lenses stay comfortable and last longer.

Quick answer

Clean and store your Colourvue lenses by washing and drying your hands first, then using fresh multi-purpose solution to rub, rinse, and soak each lens in a clean case. Never use tap water, and replace the solution every time you store the lenses. This routine keeps the lenses comfortable and helps them last through their recommended replacement schedule.

Set up a clean workspace before you touch the lenses

Pick a well-lit, clutter-free surface near a sink, but keep the drain closed or use a small tray. Wash your hands with a mild, fragrance-free soap and dry them with a lint-free towel. Avoid oily or moisturising soaps because residue can transfer to the lens surface and cause irritation or blurry vision.

Have your solution bottle, lens case, and a small mirror within reach before you open the case. This reduces the chance of dropping a lens while searching for supplies.

Clean each lens with a rub-and-rinse method

Place one lens in the palm of your hand and apply a few drops of fresh multi-purpose solution. Gently rub the lens with your index finger for about five to ten seconds on each side. This step removes protein, lipids, and cosmetic residue that can build up on coloured lenses.

Rinse the lens thoroughly with the same solution. Do not use saline or rewetting drops as a substitute for cleaning, because they do not disinfect or remove deposits. If you wear the lenses only occasionally, clean them immediately after removal rather than letting them sit dirty in the case.

Store lenses in fresh solution every time

After rinsing, place the lens in the correct side of the case and fill it with fresh multi-purpose solution. Never top up or reuse old solution, because it loses disinfecting power and can become a breeding ground for microorganisms. Close the caps tightly and store the case upright.

If your lenses are not in a sealed, unopened blister pack, they should always be fully submerged in solution. Leaving a lens partially exposed can cause it to dry out, warp, or become uncomfortable.

Keep the lens case clean and replace it regularly

Empty the case after each use, rinse it with fresh solution, and let it air-dry face down on a clean tissue. Do not use tap water to rinse the case, and do not store it closed while wet. Replace your lens case at least every three months, or sooner if it looks cloudy or cracked.

Write the date on the case with a permanent marker when you start using it. That simple habit makes it easier to remember when a replacement is due.

Your step-by-step Colourvue care routine

Wash and dry your hands: Use a mild, fragrance-free soap and a lint-free towel. This prevents oils and fibres from reaching the lens surface. Checkpoint: your hands should feel squeaky clean, not slippery or greasy.
Rub and rinse each lens with fresh solution: Place the lens in your palm, apply multi-purpose solution, and rub gently for five to ten seconds per side. Rinse with the same solution. Common mistake: skipping the rub step and only soaking the lens, which leaves deposits behind.
Soak lenses in fresh solution overnight: Put each lens in the correct case chamber and fill with new solution. Never reuse or top up old solution. Checkpoint: the lens should be fully submerged and the case caps sealed tight.
Clean and air-dry the lens case: Empty, rinse with fresh solution, and leave the case open to dry face down on a clean tissue. Replace the case every three months. Common mistake: storing the case closed while damp, which encourages microbial growth.
Store the case upright in a cool, dry place: Keep the closed case away from direct sunlight, heat, and humid bathrooms. Use the lenses within the recommended replacement schedule. Next step: mark your calendar to replace the case and lenses on time.

Colourvue lenses in this care routine

Colourvue 3 Tone Contact Lenses: ColourVUE 3 Tones use colour blending technology for a subtle, natural look and are available in shades such as Aqua, Ash, and Mint. Subtle blending patterns show deposits and residue more easily, so consistent cleaning keeps the colour effect even and comfortable.
Colourvue Glamour Contact Lenses: Colourvue Glamour lenses are designed for a sophisticated, glamorous look with a touch of luxurious colour. If you wear Glamour for events, clean and store them right after removal so they are ready for the next occasion without irritation.